#28#11#16#22#25 A ver, esperáis de verdad que un medio generalista use un término más técnico que fuerto? Pero claro, es más fácil quejarse aquí y criticar que clicar el enlace que da la noticia:
Tensile testing of 1.5mm thick Flash Processed sheet has resulted in tensile strengths in excess of 246KSI with elongation of 7.3% from AISI 8620 steel.
Tensile testing of 3.2mm thick Flash Processed sheet has resulted in tensile strengths in excess of 230KSI with elongation of 8.7% from AISI1020 steel.
Tensile testing of 8.5mm thick Flash Processed plate stock has resulted in tensile strengths in excess of 263KSI with elongation of 9.0% from AISI 4130 steel
Tensile testing of 3.2mm thick Flash Processed sheet has resulted in tensile strengths in excess of 275KSI with elongation of 7.8% from AISI 4130 steel. A simple 10 minute tempering at 220C increases elongation to 9.0%.
#29#28 Sí que lo espero, igual que espero que cuando hablan de fútbol escriban "gol" y no "canasta". Llámame quisquilloso si quieres, pero o le llamamos a las cosas por su nombre o nadie se enterará de nada.
En la página que pones en el enlace no veo mucho más que una breve explicación del proceso y la comparación de los ensayos con respecto de otros aceros, pues vale, pero tampoco me sirve de mucho ¿Te haces cargo de la cantidad de aceros de diferentes características que hay? Por composición y tratamientos podemos estar hablando de unos cuantos miles de ellos.
Que sí, a lo mejor acaba de descubrir un tratamiento en el que nadie había reparado y si es así, pues ole por sus huevos. Simplemente, como dije antes, estos milagros cada día los digiero con más excepticismo.
#45#11, #16, #22, #24, #28 no hace un mes que estuve interesandome en el tema del acero y para quien desee refrescar o conocer el mundillo del acero recomiendo este enlace (eng, pero puede ponerse en esp) www.steeluniversity.org
www.bainitesteel.com/verification.asp
Tensile testing of 1.5mm thick Flash Processed sheet has resulted in tensile strengths in excess of 246KSI with elongation of 7.3% from AISI 8620 steel.
Tensile testing of 3.2mm thick Flash Processed sheet has resulted in tensile strengths in excess of 230KSI with elongation of 8.7% from AISI1020 steel.
Tensile testing of 8.5mm thick Flash Processed plate stock has resulted in tensile strengths in excess of 263KSI with elongation of 9.0% from AISI 4130 steel
Tensile testing of 3.2mm thick Flash Processed sheet has resulted in tensile strengths in excess of 275KSI with elongation of 7.8% from AISI 4130 steel. A simple 10 minute tempering at 220C increases elongation to 9.0%.